PerTronix 1143 Ignitor® Delco 4 cyl Electronic Ignition Conversion Kit

$105.99
+ -
  • 12-Volt Negative Ground
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
  • 2:1 improvement over \"points\" in current fall time for increased coil output.
  • Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
  • Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
  • Stable timing; no need for any adjustments.
  • Pair with a Flame Thrower Canister Coil for optimal performance
  • Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-22)
  • Highlights
  • Additional Information
  • Application
  • Download Instruction Manual

Highlights

Ignitor Electronic Ignition Conversion Kits have proven themselves in applications ranging from race cars to tractors. It is the number one Electronic Ignition Conversion Kit to replace original mechanical points. A Pertronix Points Conversion kit allows you to run a stock distributor while improving the reliability and performance of your ignition system. The Pertronix Ignitor kits simply bolt to the distributor in place of the points assembly and provides a much more accurate trigger signal. This improves the timing accuracy and prevents ‘points bounce’ at higher rpm. The electronic technology also improves the dwell control to improve the spark output of the coil resulting in a hotter spark at the spark plug. With this dependable, self-contained, maintenance free electronic ignition system you'll never replace your points again.

Additional Information

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood.

Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications

Application

PERTRONIX IGNITOR KIT FOR ORIGINAL DELCO DISTRIBUTORS # 1112589 & 1112577. 4-CYLINDER, SINGLE POINT, 12-VOLT NEGATIVE GROUND, COUNTER CLOCKWISE ROTATION.

Download Instruction Manual

Instruction Manual
Instruction Manual

Download PDF

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dennis Kraus
Great Conversion kit!

Worked awesome! Tractor barely turns over and starts!

r
russ galgiani
Old Ferguson TO-50

I have used Pertronix in the past on my old Ferguson TO-35 tractor without ever having a bit of trouble after installation. So naturally I chose Pertronix again on my old Ferguson TO-50 that had a point setup in it. I took that old stuff out and installed the new electronic ignition and of course it fired right up and ran exceptionally smooth for a tractor that is 75 years old. I use these tractors for doing firebreaks for the grassland fires here in california, so its imperative that these tractors start and run each and every time. Thanks again Pertronics!

M
Michael Miller
Excellent Drop-In Replacement

The kit and the instructions were exactly what I wanted. Simply remove the points and condenser, and coil wire post from the distributor. Then feed the wires from the Hall effect plate and screw down the plate. Crimp on the eyelets, making sure to mark which wire is positive and which one is ground, and connect the wires to the coil. Finally press on the magnet ring onto the distributor shaft and reinstall the dust shield, rotor, and cap.

My tractor didn’t even need to be re-times. It started right and ran great.

L
Lyle Zabel
Thank you

Fast shipping everything came as ordered. Thank you.

CUSTOMERS ALSO VIEWED