Patriot Exhaust H8025-1 1 5/8" Tri-5 Header Chevrolet Passenger Car/Wagon Small Block Chevrolet 55-57 Metallic Ceramic Coating
Part Number: H8025-1
UPC: 694342504410
Just added to your cart
Patriot Exhaust H8025-1 1 5/8" Tri-5 Header Chevrolet Passenger Car/Wagon Small Block Chevrolet 55-57 Metallic Ceramic Coating
Qty: 1Disclaimer
Federal and state "anti-tampering" laws regulate modifications that affect emissions from motor vehicles and prohibit the sale, installation, and on-highway use of any add-on or modified emissions-related part on any pollution-controlled vehicle unless the part has received an exemption from the California Air Resources Board ("CARB") or is considered an exempt or replacement part. If a part has a California Executive Order Exemption (aka an EO #) or meets the requirements for an exempt part such as a Cat Back Exhaust system or is considered a replacement part, it is legal for sale or use in all 50 states. We are required by law to inform you about the legality of parts that we manufacture and sell and will refuse the sale of certain parts if the following requirements are not conformed with. Use of non compliant parts for purposes other than stated can result in a citation, fines, and/or confiscation of the vehicle. For the ordered parts listed below, you must certify, by clicking one of these boxes that you are using the product in the manner stated and for the application as specified by the manufacturer.
We cannot sell this part for use on a 1975 or Newer On Highway vehicle. It will not be added to your Cart.
Continue ShoppingEmissions Code
- Highlights
- Chevrolet - Bel Air, Biscayne, Caprice, Impala, Nomad & Wagon
- Chevrolet - Corvette
- Chevrolet - Corvette
- Chevrolet - Corvette
- Chevrolet - Corvette
- Additional Information
- Download Instruction Manual
Highlights
- Our popular 55-57 Chevy passenger car headers for small or big block and LS1 / LS6 swaps.
- Durable 18-gauge tubing
- Comes complete with gaskets, header bolts and collector reducers.
- Available in three finishes; raw steel for individual customizing, Hi-Temp Black coating or Metallic Ceramic Thermal Barrier coating
- Limited One Year Warranty
Chevrolet - Bel Air, Biscayne, Caprice, Impala, Nomad & Wagon
- Years:
- 1955-1957
- Engine:
- 265-400
- EO Code:
- Tube Size:
- 1 5/8"
- Collector Size:
- 2 1/2"
- Port Shape:
- RD
Chevrolet - Corvette
- Years:
- 1955-1982
- Engine:
- 265-400
- EO Code:
- Tube Size:
- 1 5/8"
- Collector Size:
- 2 1/2"
- Port Shape:
- RD
Chevrolet - Corvette
- Years:
- 1955-1982
- Engine:
- 265-400
- EO Code:
- Tube Size:
- 1 5/8"
- Collector Size:
- 2 1/2"
- Port Shape:
- RD
Chevrolet - Corvette
- Years:
- 1955-1982
- Engine:
- 265-400
- EO Code:
- Tube Size:
- 1 5/8"
- Collector Size:
- 2 1/2"
- Port Shape:
- RD
Chevrolet - Corvette
- Years:
- 1955-1982
- Engine:
- 265-400
- EO Code:
- Tube Size:
- 1 5/8"
- Collector Size:
- 2 1/2"
- Port Shape:
- RD
Additional Information
Our popular 55-57 Chevy passenger car headers for small or big block and LS1 / LS6 swaps offer superior performance and fit. These headers accommodate the GM 605 power steering box conversion and fit most motor mounts. Check footnotes for rack and pinion steering compatibility. Extra ground clearance makes "slammed" cars driveable and above frame rail exhaust system installation easy. Available in a raw finish for individual customizing or with Patriot's metallic ceramic coating.
Download Instruction Manual
Emissions Code
PerTronix Performance Ignition and Exhaust Brands use a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:
This product has been granted a California Air Resources Board (CARB) Executive Order (EO Number) Exemption. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer’s Application Guide and Installation Instructions.
This product is legal for use on 1975 and older Non-Catalyst equipped vehicles and is considered a “Replacement Part” per California Air Resources Board regulations, providing ALL emissions sensitive components are retained, including EGR, A.I.R., Heat Risers, etc. and any original or retrofit PCV or NOx device is required for the year of the vehicle. Failure to retain any of these components, or use on ANY originally catalyst equipped vehicles, would render this product illegal for street or off highway use and may only be used for Closed Course Competition.
This product is ILLEGAL for street or off highway use and is only intended for Closed Course Competition use and may never be operated on the street or for off highway use, except for 1965 and older US manufactured, California Certified vehicles; 1967 and older foreign manufactured vehicles, which may have this product installed as long as the vehicle still meets emissions standards for the year of the vehicle and retains any original or retrofit emissions control devices, including EGR, A.I.R. and any NOx device required for the year of the vehicle.
This product is considered a Replacement part per CARB and EPA regulations for emissions compliance and is legal for sale and use on all vehicles in all 50 states when installed according to the Manufacturer’s Application Guide and Installation Instructions.
This product is legal for street or off highway use in states that do not required California EO certification. PerTronix has reasonable basis (prior testing) and believe that this product allows the vehicle to operate within the legal emissions standards in the states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A. This product is not legal for street or off highway use in states that require CARB EO’s and may only be sold or used for Closed Course Competition use in those states.
This product is certified by the manufacturer as being a Non-Emissions sensitive part and therefore does not require emissions certification as emissions regulations are not applicable.
This product is designed for swapping a non-original engine into a vehicle that did not offer it. Laws vary by state regarding emissions regulations for engine swaps. This product is illegal for Street or Off Highway use on any 1975 or newer vehicle originally equipped with a catalytic converter and may further be illegal depending on state or federal engine swap emissions laws regardless of vehicle year and would therefore only be legal for Closed Course Competition use.
