JBA Performance Exhaust 6618S 1 5/8" Header Long Tube Stainless Steel 66-77 Ford Bronco 260-302 Engine Natural finish
Part Number: 6618SUPC: 694342553784
Federal and state "anti-tampering" laws regulate modifications that affect emissions from motor vehicles and prohibit the sale, installation, and on-highway use of any add-on or modified emissions-related part on any pollution-controlled vehicle unless the part has received an exemption from the California Air Resources Board ("CARB") or is considered an exempt or replacement part. If a part has a California Executive Order Exemption (aka an EO #) or meets the requirements for an exempt part such as a Cat Back Exhaust system or is considered a replacement part, it is legal for sale or use in all 50 states. We are required by law to inform you about the legality of parts that we manufacture and sell and will refuse the sale of certain parts if the following requirements are not conformed with. Use of non compliant parts for purposes other than stated can result in a citation, fines, and/or confiscation of the vehicle. For the ordered parts listed below, you must certify, by clicking one of these boxes that you are using the product in the manner stated and for the application as specified by the manufacturer.
We cannot sell this part for use on a 1975 or Newer On Highway vehicle. It will not be added to your Cart.Continue Shopping
We cannot sell this part for use on a 1974 or older Non Catalytic Converter equipped vehicle. It will not be added to your Cart.Continue Shopping
- Installation Notes
- Additional Information
- Download Instruction Manual
- 3/8" thick CNC laser-cut flanges
- Patented JBA Firecone® collector
- Large 1 5/8" diameter mandrel-bent stainless steel tubes
- Oversized exhaust ports
- Instructions: Instruction Sheet
- Estimated Installation Time: 6 hours
- Installation Footnotes
- 3 - Installation requires welding/modification to exhaust system.
JBA Performance Exhaust uses a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:
This product is Not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations and is only intended for Closed Course Competition use, except 1965 and older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emissions standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle.
JBA long tube headers are the number one choice for maximum performance gains and high RPM efficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase in horsepower and torque throughout the RPM range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra thick 3/8" one piece flanges, and patented JBA Firecone®* merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so lowered cars do not drag the collectors. Each system includes high quality hardware and thorough instructions for a professional no-leak installation. *Standard on 4-1 long tube V8 applications. Not available on Tri-Y headers. 1. 3/8" thick CNC laser-cut flanges • Prevents leaks caused by warping 2. Patented JBA Firecone® merged collector • Increased hp/tq, improved exhaust scavenging 3. O2 sensor provisions • Standard on EFI headers for proper connection 4. Large dia. mandrel-bent stainless steel primary tubes • Maximum flow and high RPM efficiency 5. Oversized exhaust ports • Accommodates ported cylinder heads
- Application Notes
- JBA Performance Exhaust 6618S 1 5/8" Header Long Tube Stainless Steel 66-77 Ford Bronco 260-302 Engine Natural finish
Download Instruction Manual
Emissions CodePerTronix Performance Ignition and Exhaust Brands use a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:
This product has been granted a California Air Resources Board (CARB) Executive Order (EO Number) Exemption. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer’s Application Guide and Installation Instructions.
This product is legal for use on 1975 and older Non-Catalyst equipped vehicles and is considered a “Replacement Part” per California Air Resources Board regulations, providing ALL emissions sensitive components are retained, including EGR, A.I.R., Heat Risers, etc. and any original or retrofit PCV or NOx device is required for the year of the vehicle. Failure to retain any of these components, or use on ANY originally catalyst equipped vehicles, would render this product illegal for street or off highway use and may only be used for Closed Course Competition.
This product is ILLEGAL for street or off highway use and is only intended for Closed Course Competition use and may never be operated on the street or for off highway use, except for 1965 and older US manufactured, California Certified vehicles; 1967 and older foreign manufactured vehicles, which may have this product installed as long as the vehicle still meets emissions standards for the year of the vehicle and retains any original or retrofit emissions control devices, including EGR, A.I.R. and any NOx device required for the year of the vehicle.
This product is considered a Replacement part per CARB and EPA regulations for emissions compliance and is legal for sale and use on all vehicles in all 50 states when installed according to the Manufacturer’s Application Guide and Installation Instructions.
This product is legal for street or off highway use in states that do not required California EO certification. PerTronix has reasonable basis (prior testing) and believe that this product allows the vehicle to operate within the legal emissions standards in the states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A. This product is not legal for street or off highway use in states that require CARB EO’s and may only be sold or used for Closed Course Competition use in those states.
This product is certified by the manufacturer as being a Non-Emissions sensitive part and therefore does not require emissions certification as emissions regulations are not applicable.
This product is designed for swapping a non-original engine into a vehicle that did not offer it. Laws vary by state regarding emissions regulations for engine swaps. This product is illegal for Street or Off Highway use on any 1975 or newer vehicle originally equipped with a catalytic converter and may further be illegal depending on state or federal engine swap emissions laws regardless of vehicle year and would therefore only be legal for Closed Course Competition use.