JBA Performance Exhaust - 1655SH

JBA Performance Exhaust 1655SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 1655, 351W for T5 Transmission with Cable Clutch

JBA Performance Exhaust 1655SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 1655, 351W for T5 Transmission with Cable Clutch

Part Number: 1655SH / UPC 694342525644
Skip to product information

Product Info

  • O2 sensor provisions where required
  • Factory style hangers
  • Mandrel bent 409 series stainless tubing
  • Heavy duty flanges
  • This product is not legal on catalytic converter equipped vehicles for street or off highway use in California or in states that have adopted California emissions regulations and is only intended for closed course competition

Installation Notes

Instructions: Instruction Sheet
Estimated Installation Time: 1 hours
Installation Footnotes
56 - For use with JBA headers only.
Know your EO

JBA Performance Exhaust uses a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:

EO Placard 1

This Product has been granted a California Air Resources Board (C.A.R.B.) Executive Order ("EO") Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.

Highlights

  • O2 sensor provisions where required
  • Factory style hangers
  • Mandrel bent 409 series stainless tubing
  • Heavy duty flanges
  • This product is not legal on catalytic converter equipped vehicles for street or off highway use in California or in states that have adopted California emissions regulations and is only intended for closed course competition

Installation Notes

Instructions: Instruction Sheet
Estimated Installation Time: 1 hours
Installation Footnotes
56 - For use with JBA headers only.
Know your EO

JBA Performance Exhaust uses a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:

EO Placard 1

This Product has been granted a California Air Resources Board (C.A.R.B.) Executive Order ("EO") Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.

Additional Information

JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular applications as a stand alone upgrade or an addition to existing JBA products. Each system is application specific and optimized for your vehicle to get a perfect fit every time. They feature smooth flowing mandrel-bent tubing, heavy duty flanges, factory style hangers and provisions for factory emissions equipment for a simple installation. Available in H or X pipe configuration for most applications. 1. O2 sensor provisions * Standard on EFI headers for proper connection 2. Factory style hangers * Easy installation 3. Large diameter mandrel-bent tubing * Increased hp/tq and improved throttle response 4. Heavy duty flanges* Durable connection with exhaust system

Applications

Application Notes
For use w/ 1655S headers
65-73 Ford Mustang 351W

Download instruction manual

Instruction Manual
Instruction Manual

Download PDF

Reviews

JBA Performance Exhaust - 1655SH

JBA Performance Exhaust 1655SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 1655, 351W for T5 Transmission with Cable Clutch

JBA Performance Exhaust 1655SH 2.5" Stainless Steel Mid-Pipe H-Pipe for 1655, 351W for T5 Transmission with Cable Clutch

Part Number: 1655SH / UPC 694342525644
Regular price $289.95
Sale price $289.95 Regular price

Part Number: 1655SH / UPC 694342525644
Emissions code

Emissions Code

Continue Reading to Understand Emissions Codes

View full details

Product Info

  • O2 sensor provisions where required
  • Factory style hangers
  • Mandrel bent 409 series stainless tubing
  • Heavy duty flanges
  • This product is not legal on catalytic converter equipped vehicles for street or off highway use in California or in states that have adopted California emissions regulations and is only intended for closed course competition

Installation Notes

Instructions: Instruction Sheet
Estimated Installation Time: 1 hours
Installation Footnotes
56 - For use with JBA headers only.
Know your EO

JBA Performance Exhaust uses a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:

EO Placard 1

This Product has been granted a California Air Resources Board (C.A.R.B.) Executive Order ("EO") Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.

Highlights

  • O2 sensor provisions where required
  • Factory style hangers
  • Mandrel bent 409 series stainless tubing
  • Heavy duty flanges
  • This product is not legal on catalytic converter equipped vehicles for street or off highway use in California or in states that have adopted California emissions regulations and is only intended for closed course competition

Installation Notes

Instructions: Instruction Sheet
Estimated Installation Time: 1 hours
Installation Footnotes
56 - For use with JBA headers only.
Know your EO

JBA Performance Exhaust uses a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:

EO Placard 1

This Product has been granted a California Air Resources Board (C.A.R.B.) Executive Order ("EO") Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.

Additional Information

JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular applications as a stand alone upgrade or an addition to existing JBA products. Each system is application specific and optimized for your vehicle to get a perfect fit every time. They feature smooth flowing mandrel-bent tubing, heavy duty flanges, factory style hangers and provisions for factory emissions equipment for a simple installation. Available in H or X pipe configuration for most applications. 1. O2 sensor provisions * Standard on EFI headers for proper connection 2. Factory style hangers * Easy installation 3. Large diameter mandrel-bent tubing * Increased hp/tq and improved throttle response 4. Heavy duty flanges* Durable connection with exhaust system

Applications

Application Notes
For use w/ 1655S headers
65-73 Ford Mustang 351W

Download instruction manual

Instruction Manual
Instruction Manual

Download PDF

Reviews

You may also like