Doug's Headers DEC300AK Electric Cut-Out 3" Pair with Hook-Up Kit
Part Number: DEC300AKUPC: 694342534264
Federal and state "anti-tampering" laws regulate modifications that affect emissions from motor vehicles and prohibit the sale, installation, and on-highway use of any add-on or modified emissions-related part on any pollution-controlled vehicle unless the part has received an exemption from the California Air Resources Board ("CARB") or is considered an exempt or replacement part. If a part has a California Executive Order Exemption (aka an EO #) or meets the requirements for an exempt part such as a Cat Back Exhaust system or is considered a replacement part, it is legal for sale or use in all 50 states. We are required by law to inform you about the legality of parts that we manufacture and sell and will refuse the sale of certain parts if the following requirements are not conformed with. Use of non compliant parts for purposes other than stated can result in a citation, fines, and/or confiscation of the vehicle. For the ordered parts listed below, you must certify, by clicking one of these boxes that you are using the product in the manner stated and for the application as specified by the manufacturer.1. 1974 or older Non Catalytic Converter equipped vehicle.Installation of ALL Emissions sensitive components, including, but not limited to, Air Injection (Smog Pump), EGR, Heat Risers etc. are required to be retained. Failure to retain any of these components will render this product Not Legal for On Highway use regardless of whether or not the item comes with a bolt on provision for such equipment.
2. Closed Course Competition.The products listed below will be installed on a vehicle that is for Closed Competition use only and is not registered for and will never be used on any highway or emissions regulated off highway areas.
3. 1975 and Newer On Highway vehicle.The products listed below are being installed on a 1975 or Newer On Highway or Emissions Regulated Off Highway vehicle.
- Additional Information
- Download Instruction Manual
- Stainless steel construction electric exhaust cut-outs in 2 1/4" 2 1/2" and 3" diameters
- Rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal
- A pre-wired harness with an illuminated rocker switch is supplied for easy installation
- Un-cork your exhaust with the flip of a switch from you dash
- Ideal for race tracks that don't require mufflers
- Replacement Motor = DEC950
Doug's ELECTRIC EXHAUST CUT-OUTS The original Doug's Headers has announced a New and Improved version of their popular all stainless steel construction electric exhaust cut-outs in 2 1/4" 2 1/2" and 3" diameters. The engineers at Doug's have taken their famous electric exhaust cut-outs and dramatically decreased the size for more versatile installations while lowering the price as well. These cut-outs feature a rugged gear reduction 12 volt DC motor and a rotating gate for a leak proof seal every time the cut-out is opened and closed. Unlike butterfly style cut-outs the Doug's cut-outs don't have the leaky gasket sound and when fully opened there is no exhaust flow obstructions. A pre-wired harness with an illuminated rocker switch is supplied for easy installation. Un-cork your exhaust with the flip of a switch from you dash. The cut-outs are ideal for race tracks that don't require mufflers. These Doug's cut-outs are available in singles or pairs and in complete kits with Y-Pipes for easy installation
Download Instruction Manual
Emissions CodePerTronix Performance Ignition and Exhaust Brands use a voluntary product identification program whereby all emission sensitive products can be identified by placing numbered labels in product packaging and listing corresponding numeric codes next to each part number. The corresponding numbers and explanations are as follows:
This Product has been granted a California Air Resources Board (C.A.R.B.) Executive Order ("EO") Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.
This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a Replacement Part per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including A.I.R., EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition.
This product is Not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations and is only intended for Closed Course Competition use, except 1965 and older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emissions standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle.